MOLYSLIP SCS Oven Chain Lubricant (Clear)
Molyslip SCS is a 100% synthetic product developed for use where cleaning of the chain is as important
as lubrication. It is employed to good effect where carbonisation has occurred owing to the use of
conventional lubricating oils which form carbonaceous deposits at high temperature. The clear
fluid is preferable to lubricants containing graphite or molybdenum disulphide, where staining of
materials such as textiles must be avoided. This applies to stenters and heat-setting or crimping
machines. Other areas of use are to be found in bakeries and potteries.
PERFORMANCE AND USAGE:
Molyslip SCS is an excellent lubricant and protective for components made from rubber, whether natural
or synthetic. This applies to seals, O-rings and plastic bearings which would be attacked by
conventional lubricating oils causing swelling and softening. The formulation is based on special
polyalkylene glycols and synthetic esters and it does not include any solid lubricants. It is desirable
that a new chain should be run-in using MOLYSLIP PAG colloidal suspension lubricant.
This should also be employed if the operating temperature exceeds 220oC for lengthy periods.
GRADES: The standard grade is of ISO 150 viscosity which permits a generous feed and rapid
penetration, but when it is essential to avoid dripping either of the two heavier viscosity grades
ISO 320 and ISO 460 can be made available.
Operating Temperature Up to 220oC
Flash Point 230oC
Specific Gravity 1.012
5 litres, 25 litres, 205 litres
(400ml aerosol Molyslip SCS - Synthetic Chain Spray ISO 320)
||Molyslip SCS (Synthetic Chain Spray) - 全合成高温链条润滑油